Commercial & industrial flooring · United Statesestimates@bodenmuller.comRequest a Site Assessment

Interactive tool · ASTM F2170 · ASTM F1869 · ICRI 310.2R · CSI 09 05 61.13

Concrete moisture mitigation & slab prep calculator

Size the ASTM F2170 probe count, decide whether the slab needs a moisture vapor barrier, pick the ICRI surface-prep method and budget the prep and mitigation scope before the flooring bid.

1 Slab area
sq ft
2 Moisture reading
80% RH

ASTM F2170 probes at 40% depth (slab drying from top only), read after 24 h equilibration.

3 Planned finish flooring
4 Required ICRI 310.2R profile

Recommended for epoxy: CSP 3.

5 Existing surface
6 Third-party ASTM F2170 testing

Turnkey prep & mitigation

—

—

Low—
Mid—
High—

Recommended mechanical prep

Itemized prep & mitigation budget

LineLowHigh

CSI 09 05 61.13 spec checklist

    Preliminary scope for budgeting. MVB selection must follow the flooring manufacturer's written moisture limits and warranty terms. Methodology.

    Request Site Assessment With This Scope

    Reference

    Moisture limits and MVB tiers used

    Finish flooringTypical limit (F2170 RH)Typical limit (F1869 MVER)Above the limit
    Thin-film / high-build epoxy75–80%3 lbsStandard MVB to 90% RH; heavy-mil MVB to 99%
    ESD epoxy75–80%3 lbsAs epoxy; MVB must be compatible with conductive primer
    MMA~85%~5 lbsMVB or urethane cement base
    Resilient (VCT / LVT / rubber)75–85% by product3–5 lbsMVB rated for adhesive system
    Urethane cement 1/4 in.+often 90–99%10–12+ lbsOften no separate MVB — manufacturer data governs
    Polished concreten/an/aBreathable — no film to delaminate
    MVB area tierFactor on MVB rateBasic roll-onHeavy-mil 99% RH
    Under 1,500 sf (mobilization)×1.30$2.60–$4.55/sf$4.55–$7.80/sf
    1,500–4,999 sf×1.15$2.30–$4.03/sf$4.03–$6.90/sf
    5,000–19,999 sf×1.00$2.00–$3.50/sf$3.50–$6.00/sf
    20,000+ sf×0.88$1.76–$3.08/sf$3.08–$5.28/sf