Commercial & industrial flooring · United Statesestimates@bodenmuller.comRequest a Site Assessment
Long industrial hall with overhead cranes and a reflective concrete floor

About Bodenmuller

About Bodenmuller Industrial Flooring & our cost methodology

Bodenmuller scopes, prices and delivers commercial and industrial floors for US facilities. We start from the slab and the operating environment, and we publish the numbers we work from.

How we work

Most industrial floor problems are specification problems: a coating chosen for its brochure price laid over a wet slab, a thin film under steel wheels, an epoxy in a steam-washed room. Bodenmuller works the other way round — environment first, slab second, system third, price last.

We scope projects for plant engineers, facility directors and general contractor estimators across the major US industrial corridors: the Midwest food and manufacturing belt, Texas and Southeast logistics hubs, and Mid-Atlantic pharmaceutical and cold storage. Each project gets an on-site slab assessment, an ASTM F2170 testing plan where the slab is on grade, an ICRI 310.2R surface profile target and a CSI-sectioned proposal, delivered through installation crews qualified for the chosen system and manufacturer.

The two estimators on this site are the same models our estimators use for first-pass budgets. They are free, they do not need an account, and the prices they show are the ranges we stand behind at the budgeting stage.

Contact

Hours
Mon–Fri, 7:00 am–6:00 pm Central
Service area
United States — commercial & industrial
Request a Site Assessment

Cost & engineering methodology

How the numbers on this site are built

All prices are 2025–2026 US commercial turnkey benchmarks — materials, labor, equipment and standard preparation — compiled from published manufacturer system data, contractor bid ranges and industry cost references. They are budgeting ranges, not quotations: regional labor, access, slab condition and manufacturer selection move the final number.

ReferenceWhat it governs on this site
CSI MasterFormat 09 67 23 — Resinous FlooringEpoxy, urethane cement, MMA and ESD system scopes
CSI MasterFormat 03 35 43 — Polished Concrete FinishingPolished concrete classes and grits (03 35 43.13 for dyed)
CSI MasterFormat 09 05 61.13 — Moisture Vapor Emission ControlMVB scope and checklist
ASTM F2170 — In-situ relative humidityProbe count (3 for first 1,000 sf + 1 per additional 1,000 sf), $100–$325 per location
ASTM F1869 — Calcium chloride MVERAlternative moisture metric (lbs/1,000 sf/24 h)
ASTM F150 / ANSI/ESD STM7.1 — Electrical resistance of floorsESD acceptance testing
ANSI/ESD S20.20 — ESD control programConductive vs. dissipative ranges
ICRI 310.2R — Concrete surface profileCSP 2–5 targets and prep method selection
ACI 302.1R — Concrete floor and slab constructionControl joint filling and spall repair

Unit prices, minimums and scale

  • Base system rates are per square foot installed, with the ICRI profile the system needs included.
  • Small projects under 2,000 sf carry a 20–35% mobilization uplift on resinous systems, and every estimate has a $5,000 project minimum.
  • Scale: resinous systems fall 12–22% at 20,000+ sf and 20–30% at 50,000+ sf. Polished concrete uses separate large-warehouse and under-5,000 sf rates instead.
  • Moisture mitigation: standard roll-on MVB $2.25–$3.50/sf (75–89% RH), heavy-mil warranted MVB $3.50–$6.00/sf (90–99% RH) in the estimator; the moisture calculator applies area tiers (×1.30 under 1,500 sf, ×1.15 to 4,999 sf, ×1.00 to 19,999 sf, ×0.88 from 20,000 sf) to basic $2.00–$3.50 and heavy-mil $3.50–$6.00 rates.
  • Mechanical prep (calculator): $0.50–$0.90/sf at 10,000+ sf, $0.90–$1.50/sf at 2,000–9,999 sf, $1.50–$2.50/sf under 2,000 sf, multiplied by profile (CSP 2 ×0.85, CSP 3 ×1.00, CSP 4 ×1.15, CSP 5 ×1.35); removal adds $1.00–$3.25/sf by condition.
  • Shift premium: night, weekend and phased shutdown work adds 15% (low), 18% (mid) and 25% (high) to the installed subtotal.

15-year total cost of ownership

TCO = mid-range installed cost + recoat or renewal cycles + routine maintenance. A system whose expected life is shorter than 15 years is recoated ceil(15 ÷ life) − 1 times at 70% of its original system cost (lighter prep, no MVB). Polished concrete is re-densified and re-burnished twice ($0.40/sf each); MMA receives one topcoat renewal at 35%. Annual maintenance per square foot: polished concrete $0.12, epoxy $0.20, ESD $0.25 (includes periodic resistance testing), urethane cement $0.10, MMA $0.12. Expected life used: thin-mil epoxy 6 years, high-build epoxy 10, ESD 12, MMA 15, urethane slurry 15, urethane trowel and thermal-shock 18, polished concrete 18. Downtime is shown in hours but not priced, because its cost depends on each facility's throughput.

Privacy

Privacy notice for assessment requests

When you submit the site assessment form we receive the details you enter (name, work email, phone, company, facility location and type, floor parameters and notes) and the IP address of the request, which we keep to prevent abuse. We use them only to answer your request, prepare an assessment and proposal, and — where you ask for installation — to share the scope with the installation crew assigned to your project. We do not sell personal data and do not use it for unrelated marketing.

The estimators run entirely in your browser; the values you enter are not sent to us unless you choose to submit them with an assessment request. When you use "Request Site Assessment With This Scope", the summary is kept in your browser's session storage only until you send or close the form. This site sets no advertising or tracking cookies.

To see, correct or delete the information you sent us, write to estimates@bodenmuller.com.

Terms of use

Using the figures on this site

Cost ranges, cure times, moisture limits and recommendations on bodenmuller.com are general engineering guidance for preliminary budgeting. They do not replace a site assessment, ASTM F2170 test results or the written data and warranty requirements of the flooring manufacturer selected for your project. Standards named on this site belong to their respective organizations (CSI, ASTM International, ICRI, ACI, ESD Association).

Photography

Photographs are illustrative and sourced from Pexels: Willians Huerta, Pixabay, Yetkin Ağaç, Anna Shvets, Daniel Dan, Anna Shvets, ELEVATE, Muaiad Elameen, Jan van der Wolf, Brett Sayles, YIHAI LASER, ravencrow BI.